光电模块 erjiguangdianmokuai
您当前位置:首页 > 产品中心 > 光纤水听器件 > 光电模块
http://cdn.0551web.com/www.csrayzer1.com/uploadfiles/image/20200422/20200422173255531.png
大功率μs 光开关 High power switch with s light

CLHR 系列 1x5, 1x6 保偏高功率光开关用来控制输入光的输出通道,同时采集反射信号到专属的传感端。该结构设计主要用于传感及 雷达应用,具有非常小的损耗,并且不需要额外加环形器或耦合器。同样,该光开关内部不含机械运动。做为一个锁定式的光开关, 当驱动信号去除(掉电)后,光开关会保持在原来选定的工作状态。

产品详情资料下载
CLHR 系列 1x5, 1x6 保偏高功率光开关用来控制输入光的输出通道,同时采集反射信号到专属的传感端。该结构设计主要用于传感及 雷达应用,具有非常小的损耗,并且不需要额外加环形器或耦合器。同样,该光开关内部不含机械运动。做为一个锁定式的光开关, 当驱动信号去除(掉电)后,光开关会保持在原来选定的工作状态。

CLHR series 1x5, 1x6 high-power optical switches are used to control the output channel of the input light and collect the reflected signal to the exclusive sensing end.The structure is designed for sensor and radar applications with very small loss and no need for additional toroidal or coupler.Again, the optical switch contains no mechanical motion inside.As a locked optical switch, when the drive signal is removed (power is lost), the optical switch will remain in the original selected operating state.

技术指标

参数(Parameter

单位(Unit

最小

(minimu)

标准

(standard)

最大

(maximum)

中心波长(Center Wavelength

nm
1520
1550 1580

插入损耗(Insertion Loss

1295
1310 1325
串扰(crosstalk)
dB
- 1.2 1.6
指向性(directivity)
dB
40 50 -

消光比(Extinction Ratio

dB
5055-
回损(return)
dB
20 25 -
可靠性(reliability)
dB
5055-
开关速度(上升/下Switching speed (up/down)
μs
5 50 200
重复频率(frequencyHz - 2k -

耐久性(durability)

Cycles
1011 --
输入光功率(Input optical power
W
- 5 -

工作温度(Operating Temperature

0C
0 ~ +75


封装尺寸(Package Dimension

mm
72 x 37 x 7.8



订货信息